There can be various reasons that may force your Netgear extender from getting disconnected from your home network. Yes, absolutely! This can also prevent you from accessing the mywifiext setup page. So, it is important for you to get your Netgear WiFi extender connected to your home network.
Don’t know how to reconnect your Netgear WiFi extender to home network? Wipe out your sweat because we have got you covered. Here, in this article, we have mentioned two easy methods following which the process “how to reconnect Netgear extender to home network” will be as easy as counting 123. Let’s start over!
Reconnect Netgear Extender to Home SSID
Using Ethernet Source
Below mentioned are step-by-step instructions that will help you reconnect your Netgear extender to your home network using Ethernet source:
Step 1: Plug in your Netgear extender first to a working wall socket. Make sure to plug the extender in near to your existing router.
Step 2: Turn the extender on and give its power LED some time to flash a solid green color.
Step 3: Open a web browser (any of your choice). For this, you have to turn on an up-to-date device like computer or laptop. Make sure that latest software is installed on it.
Step 4: Enter mywifiext.net(extender’s default web address) in the URL bar. Bear in mind that you are using an updated web browser version. The reason is, outdated web browser version is one of the major causes behind getting mywifiext.net not working issue.
Step 5: Have you entered the web address in the URL bar? If yes, press Enter. Also, ensure that the private window or the browser’s search bar is not being used by you.
Step 6: Netgear extender login page will display.
Step 7: Input the Netgear extender login details and click Log In.
Keep in mind to use the correct default Netgear extender login username and password, ok? If you have changed them while performing Netgear extender setup, ensure to use them.
Step 8: Are you logged in to Netgear extender? If yes, navigate to the extender’s settings page and choose the Setup option.
Step 9: Enter the WiFi password. Done doing that? If yes, click on Apply to save the changes made.
In this manner, you can reconnect your Netgear extender to your home WiFi using an Ethernet source. Now, you can unplug your Netgear extender and place it anywhere in your home.
Using WiFi Source
Here are the instructions to be applied by you in the exact given order to reconnect your Netgear extender to your home network using a WiFi source. Here we go:
Step 1: To begin with the process, you first need to reset your Netgear extender back to factory default values. For this, press and hold the Netgear extender’s reset hole for a couple of seconds and release it. Before initiating the reset process, make sure to disconnect your Netgear extender, router, and your client devices.
Step 2: Reconfigure Netgear extender and reconnect it to your home router.
Step 3: Open an internet browser. Hope you have updated it?
Step 4: Clear the browsing history. Once done, hover the mouse cursor to the browser’s address bar, thereafter, type mywifiext.net or 192.168.1.250.
Step 5: Now, press the Enter key to have access to Netgear extender login window.
Step 6: Carefully enter the default (if not changed) login details of your Netgear WiFi range extender in the required fields. Once you are done, click Log In.
Step 7: Follow the on-screen prompts. Done doing that? If yes, you are all setto reconnect your Netgear range extender to your home network using a WiFi source.
Congrats! You are now able to surf the internet from any corner of your house.
Important Points to Consider
Ensure that your Netgear range extender and host router is placed in close proximity and in the same room. If not, do the needful right away.
Have a look at the power. Make sure that continuous electricity is supplied to your Netgear range extender. If you find any sort of damages in the wall socket, instead of using it, replace it right away. But, don’t do the mistake of using a damaged wall socket for your extender as it can make it non-working completely.
Apart from this, also ensure that the firmware of your Netgear range extender is up-to-date.
Avoid using public WiFi and damaged Ethernet cable. Moreover, the Ethernet connection established between the devices must be finger-tight.
The Last Words
Our article on how to reconnect Netgear extender to home WiFi ends here. We hope that the instructions we have provided here have helped you complete the process with ease. Thus, we wish you happy streaming with Netgear range extender, Merry Christmas, and a super-duper happy New Year.