The post How to Reset Netgear Router? appeared first on Magazinediary.
]]>No matter what ever is the reason, a solution to get rid of router-related issues is to reset your Netgear router back to factory default values.
Before you reset your Netgear router, get aware of the fact that the factory reset process will delete all the customized settings you have made on your router including the login username and password. So, it becomes necessary to take the backup of your Netgear router’s settings prior to resetting it.
Now, the question arises, how to reset your Netgear router. Well, there are various methods following which the Netgear router reset process can be done easily.
The hard reset method
The soft reset method
And, reset using the Netgear app
We will provide you with instructions to reset your Netgear router using all the 3 methods. You can apply any of these methods as per your understanding and comfort. Keep reading!
Follow the steps outlined underneath and know how to reset your Netgear router using the hard reset method. Here we go!
First of all, ensure that your router is turned on and disconnected from modem, PC, laptop, smartphones, Alexa devices, etc.
Secondly, ensure that your Netgear router is receiving a steady power. Please choose a working wall socket for your device. Else, you will face issues while resetting it.
Now, look for the reset hole present on your Netgear router.
Once found, press it gently using any thin, pointed, and sharp object.
That’s it! In this manner, you can easily reset your Netgear router using the hard reset method. Now, it is suggested to perform Netgear router setup from scratch via routerlogin.net.
Follow the steps highlighted below to soft reset your Netgear router in a flash:
First things first, make sure that your Netgear router is powered on and the power LED on it is green and stable.
Then, log in to your Netgear router either using routerlogin.net or 192.168.1.1.
Access the settings page of your Netgear router using the device default login credentials.
Locate the reset option and click on it upon finding it.
You will be asked to confirm your decision.
Confirm the same and let your Netgear router to reboot.
That’s it! In this way, you can reset your Netgear router using the soft reset method. Now, to make the Netgear router up and working, you have to configure it again using the WPS method or manual method. For WPS method, just press the WPS button on your Netgear router and then on your internet modem. Once you are done doing this, your Netgear router will be configured shortly.
Follow the instructions highlighted below and know how to reset your Netgear router using the app:
Right off the bat, download the Netgear app from Play Store or App Store on your smartphone. Be sure to download the correct version of the Netgear app as per the smartphone you have.
Wait for the installation of the Netgear app to get completed. Once it is, launch the Netgear app and log in to it using valid login details like email ID and password.
Are you successfully logged in? If yes, navigate to the settings page of your Netgear app and locate the reset option.
Once you find it, tap on it and allow your Netgear router to reset. It might take some time. So, you need to have patience!
This is how you can reset your Netgear router using the app. Now, you have to reconfigure Netgear router via manual method, WPS method, or the Netgear app.
Our guide on how to reset Netgear router ends here. Anticipating that the steps we have provided to do Netgear router reset were easy and helpful. So, which method you have found easy and applied to reset your Netgear router?
The post How to Reset Netgear Router? appeared first on Magazinediary.
]]>The post Netgear Router Keeps Dropping Internet Connection: Resolved appeared first on Magazinediary.
]]>Some common reasons that lead to this situation are mentioned below:
Technical glitches
Fluctuating power supply
The unstable connection between networking devices
WiFi interference
Excessive distance between Netgear router and modem
Netgear Router Keeps Dropping Internet[Fixed]
Your Router Needs a Restart
Right away get down to work doing away with the internet connectivity trouble by restarting the router. Are you wondering how that can be done and why that should be done? Well, here is the answer. It should be done to get rid of any temporary technical issues with the device. How this can be done is mentioned below:
First of all, turn the power supply off by toggling the power button.
Unplug your Netgear router from the power socket.
Now, disconnect any cable that is connected to it.
Wait for a certain amount of time, like say for a couple of seconds.
Next, plug in back your Netgear router to the power socket and turn the power supply on.
As soon as you are done restarting your Netgear router, check if the Netgear router internet dropping issue has left your side or not. If it still is lingering around then get ahead with the next hack.
Correct the Router’s Power
Begin by checking the power socket to which you have connected your Netgear router. Be very certain that it isn’t damaged from anywhere. Also, check that the power adapter is connected properly to the wall socket. On the off chance that you see that the wall socket is damaged, getting it replaced immediately is the best option. Once done check if the Netgear router is giving out a full-fledged internet signal. If the signal dropping is still happening then the next step is what you should be looking at.
Kick Out WiFi Interference
Microwave ovens, cordless phones, Bluetooth speakers, baby monitors, gaming consoles, play stations, etc. have the ability to interfere a lot with your Netgear router network. So, if you keep such devices or appliances away from your Netgear router then it is going to get rid of the Wifi interference.
It is now time to check if the issue has been fixed or not. Congratulations if you got successful, else proceeding with the next step is recommended.
Reconnect Devices
There is a possibility of a wrongly connected router and modem causing the issue. Perhaps the connection between them is not finger-tight. Or maybe the Ethernet cable that you have used is damaged. To fix this cause, replace the damaged cable right away and make sure you are inserting it correctly into the respective ports on both devices. This will ensure a secure and stable connection between the Netgear router and the modem.
Reset Router
Did nothing work yet? Well, it is now time to reset the Netgear router. In case you have no idea what we are talking about then let us tell you that a simple reset process deletes every single customized data from the router and factory settings will be restored on it. It is one of the finest remedies for technical devices. Thus, wait no more and do this:
Locate the Reset button on your Netgear router.
Push it.
There you go! You have successfully reset your Netgear router. It is now time to set it up again. Thus access the routerlogin.net admin page and carry on with the setup process. In case you are not very sure how to do that then taking help from the user manual that came along with the device will be helpful.
In a Nutshell
Here our write about how to troubleshoot the Netgear router that keeps dropping the internet issue comes to an end. We are very hopeful that the tips and tricks provided in this article proved to be useful to you.
The post Netgear Router Keeps Dropping Internet Connection: Resolved appeared first on Magazinediary.
]]>The post Unable to Access Netgear Nighthawk Login Page? Let’s Fix This! appeared first on Magazinediary.
]]>This is a magical trick that works wonders in most cases to get any technical issue fixed. Reboot process kicks out temporary technical hitches with the Netgear router. Thus without wasting any further minutes, reboot the Netgear router right away. Simply disconnect the power supply to the router by unplugging it from the wall socket. Plug it back after waiting for some time. Once the device is up and running, try accessing the login page either on your computer by using routerlogin.net or Nighthawk app. If the issue hasn’t got fixed yet, then try another hack.
Whether it is the web-based interface or the Nighthawk app, make very sure that you are trying to log in using the correct login credentials. Ensure entering the username as well as password in the respective fields without making any typing errors. While using a computer or laptop to log in, check that the Caps Lock key on the keyboard is not enabled. If you have changed the login password, then use the changed password otherwise you will get a login error.

Check Also: How to Fix Linksys RE6400 Extender Keeps Disconnecting?
If the login errors are troubling you while you are trying to log in to your router on the computer using the web-based GUI, then check if you are using the right login web address. Make certain that you are entering www.routerlogin correctly in the address bar of the web browser. Also, make it a point to enter the login URL in the URL bar and not in the search bar of the browser.
An outdated web browser may hamper the Netgear router login process as well. So check if the web browser that you are using to log in is not outdated. If it is, then consider updating it to the latest version first. Additionally, you can also clear out the cache and cookies of the browser. Once done, try accessing the routerlogin.net page.
In case it is the Nighthawk app that you are using to access the Netgear router dashboard, then make a check if it is out-of-date. Directly head toward the Play Store or the App Store and get the Nighthawk app updated to the latest version. As soon as it is updated, tap on its icon to launch it and log in to the router.

Do you know that the Netgear router should be receiving a stable internet network so that you can access its login page? Thus, check the connection source of the Netgear router and the modem. Have you connected the networking devices using a wireless medium? If yes then try to connect them again after disconnecting them. If the issue gets fixed, then fine. Otherwise, try using a wired medium to connect the Netgear router to the modem. Fetch a well-working Ethernet cable and insert one of its ends into the router and the other into the modem. Are you able to access the Netgear login dashboard?
This should be your final resort. If no other troubleshooting hacks worked till now, then reset your device. This will delete any customized settings from it and make it as good as a new router. Of course, it won’t be exactly a new router, just out of the box, but yes it will have the factory settings restored on it. After this, you need to access the Netgear Nighthawk login page and reconfigure the router. In case you are not sure how that can be done, then try taking the help of the user manual that you go along the router during purchase.
With the hope of helping you out, here we close this helpful guide about fixing Netgear router login issues. Once you are able to access the login page, get the router’s firmware updated to the latest version and keep any such issues at bay.
The post Unable to Access Netgear Nighthawk Login Page? Let’s Fix This! appeared first on Magazinediary.
]]>